Home Beer Brewing – Sanitizing and Cleaning Your Equipment
- Author Mark Howard
- Published July 29, 2010
- Word count 551
If you wish to become a real pro at home beer brewing then you must make the effort to clean and sanitize all your home brewing equipment from your bottles thru to your Beer Fermenter and everything in between. Excellent cleaning habits and a very clean environment are the keys to making successful home made beer
There are three main steps you need to take, one is simply to clean your equipment, the other is to sanitize everything that will come into contact with your beer and finally to sterilize.
Cleaning is done to simply remove all the dust dirt and stains that are visible on your home brewing equipment which includes all your bottles. Sanitizing is the process of removing or eliminating the invisible bacteria and micro-organisms that can ruin your home brew beer. Sterilizing or boiling your wort at a very high temperature for an hour or more is another way to maintain a clean environment for the brewing process.
Having a very clean and dust proof environment to work and store all this equipment is another crucial factor in determining the success of your home brew. Its no use doing all this cleaning if the area that you rinse and drain all the equipment is contaminated as all your hard work could come undone very quickly. It goes without saying that dogs and cats are a big no no!
There are a number of different chemicals that can be used for this cleaning process ranging from iodine-based, chlorine based to ammonia based as well as some environmentally friendly cleaners. I’ve found that ammonia is good for cleaning your bottles but make sure that you give all your equipment a very thorough Hot water rinse.
With the iodine-based product be careful as it will stain any plastic equipment as well as your skin, so wear gloves. I find that chlorine is excellent to use but it can cause corrosion on any stainless steel brewing equipment. Please do not ever mix these chemicals together as they could release a very toxic gas!
To start the process of sterilizing your beer brewing equipment you will need a large sterilized sink or tub so that you can completely immerse the equipment and give it a good soak. Make sure that you always use soft clean sponges on all your equipment as any abrasive type cleaners will only scratch your plastic and stainless equipment. If you follow the instructions from the manufacture closely you should not have any problems.
Be very careful not to use hot water with Chlorine based products as the heat can cause gas to be released.
Once your home made beer is ready you will need to clean and sterilize the bottles. Using a large basin and the correct amount of sanitizer, immerse all your bottles, making sure that there are no air bubbles. Leave for over thirty or forty minutes before you clean with a bottle brush and then, rinse twice and drain. Making sure that the environment is as clean as possible, you don’t want anything to go wrong now. You are not finished yet. Remember to sanitize the bottle caps by boiling for about ten minutes or soaking in a iodine based solution depending on what type of cap you are using.
Good Luck!
Mark Howard was introduced to the art of producing home made beer by his father over twenty or more years ago. "Never Stop Experimenting" and "Always Enjoy the Fruits of your Labor in Moderation."
http://www.homebrewbeerfermenter.com
Article source: https://articlebiz.comRate article
Article comments
There are no posted comments.
Related articles
- Transforming Plastic Extrusion Machines into Recycling Powerhouses
- Unraveling the Potential of Plastic Extrusion Machines
- The Rise of Plastic Recycling Machines: A Step Towards Sustainability
- Strawberry Cheesecake Ice Cream: OMG! Unreal!
- The Advantages of Using Professional Home Cleaners in Ilford
- 8 Compelling Reasons to Hire Professional Home Cleaners
- Send Money to Tanzania: Effortless Transfers with SafariRemit
- Stylish Savings: 10 Frugal Ways to Stay Fashionable in 2024
- Fly Cheap With FlightPapa To Any City
- How Collaborating with a Software Development Company Can Propel Your Business Forward
- A Comprehensive Guide to Choosing the Best Hair Transplant Method
- 15 Frugal Tips for a Memorable Wedding Day
- Credit Union vs. Bank
- Explore the Advantages of Renewable Energy: Wind, Solar, Biomass, Hydropower and Geothermal Energy
- Frugal Nutrition: How to Eat Healthy on a Budget
- Fintechzoom Richard Mille
- Who owns the most Bitcoin?
- Fintechzoom IBM Stock: Powerful!
- Building a Professional Website on a Budget: Using Free Tools like WordPress and AI
- Navigating Vietnam's Tourist Immigration: Challenges and Solutions
- Bitcoin FintechZoom
- Cost-Effective Gardening: Tips for Enhancing Your Garden on a Budget
- Steve Wozniak: WOZ
- Keeping Your Garage Door Running Smoothly: A Guide to Drum Replacement with GarageDoorMagnolia
- When Your Garage Door Goes Rogue: Off-Track Repair in Tacoma and Seattle
- Same Day Service? Kiki Garage Door Repairs Your Garage Door Fast in Sammamish, WA
- Cost-Effective Strategies for Business Owners in 2024: Maintaining Efficiency Without Reducing Staff
- Navigating Compliance for Personal and Professional Contributions
- Smart Savings: The Benefits of Buying Out of Season
- Youtube To MP3 Converter -- Free