How To Make Mica Lamp Shade

HomeDecorations

  • Author Jack Flagg
  • Published August 12, 2010
  • Word count 580

One of the nicest lamp shade are those made with mica. One reason for this is that it's durable and strong plus these kinds of lamps are easy to make.

Mica lamp shades is one of the lamps that came along before electricity. A few years after 1930s along came the earliest electric lamps.

Some features of Mica lamps that appeal to people are:

  1. These beautiful mica lamp shades produce a warm soft light;

  2. Mica lamp brings a sense of soft beauty into a room.

  3. Mica is group of silicate minerals and the word ‘mica’ is derived from the Latin word ‘micare’ which means ‘to glitter’.

  4. Mica produces a marble look and mica lamp shades are easy to make and you can do it yourself as well.

In this article we'll show you how to create your own mica lamp. Before you start on your project, check if you have a tape measure, a metal lampshade (with strong frame) and shears. Now purchase the amount of mica sheets you require to make the mica lamp shades. It comes in four colors, dark amber, standard amber, stained amber and white. If you have a lamp shade that you may already have at home and decide which area you would be adding the mica too, or if you plan to do a full mica lamp shade, then measure the entire shade. Once the amount is decided purchase your mica sheets.

Cut the mica sheets into the desired measurement. Slip it into the metal lampshade or fit into desired areas. Hold mica sheets in place with glue or tape or if you have tabs at the back of the fold, fold them in to hold the sheet in place. Mica lamp shades can be designed by using circular or square or even rectangular shaped rims.

If you don’t have a metal frame to make your mica lamp shades, don’t worry there is another option, though it may require a little more work! Take 4 or 6 coat hangers. Bend one of those hangers into the shape of a circle. Use a mug or a round container to get the desired shape. Do the same with another hanger and make it larger so that it can be the lower rim. Take 3 or 4 hanger pieces cut to the same measurement and connect both rims with them leaving equal spaces between them. Now comes the slightly harder part.

Take 3 hanger pieces which have been put to the same measurement. Taking a separate hanger bend it to the shape of a small circular, large enough to rest on the bulb rim. You can attach these by using thick wire and then attach it to the lower rim. Then place it on the blub rim. Make sure it is properly balanced. Now take the mica sheets and drill small holes in the corners each sheets (4 holes). Taking 3 inch sections of craft wire attach the mica to the rims, both up and down. Check if it is firmly placed. And now you have your very own home made mica lamp shade. You can use stencils and paint on your lampshade to add a little bit of color if you desire.

That's all there is to it. Pretty simple huh? Anyone who has interest and has a passion for lamp shade can make their own lamp shade. Go ahead and create you own.

Making of mica lamp shades is an interesting project. Would you like to start your project today?

Jack Flagg is the author and web blogger of Lamp Shade Info and has tons of passion about lamp shades, crystal chandeliers and lighting.

Article source: https://articlebiz.com
This article has been viewed 7,552 times.

Rate article

This article has a 3 rating with 10 votes.

Article comments

Cathy B
Cathy B · 8 years ago
Hello, I was looking for techniques for shaping mica sheets to conform to lampshade frames as opposed to cutting sections and wiring them together.

Related articles