Are you experiencing any problems with your Xbox 360 video game console? Are these problems with your Xbox 360 frustrating you? The Xbox 360 video game console, like any other machines, gadgets, or game consoles, is subject to a number of technical problems that can render it unusable. Xbox 360 problems are experienced by as many as 30- 50% of Xbox users. Xbox 360 manufacturers acknowledge these problems and have therefore extended warranties on the Xbox 360 gaming console.

There a number of technical problems your precious Xbox 360 gaming console might encounter. Xbox 360 problems can vary from the discs being scratched while in the unit, the console not reading the disk, bricking, dry solder and others. However, one problem that is sure to cause a major headache and make the blood run cold in any Xbox 360 owner’s veins, is the sight of the dreaded "red ring of death".

The RED RING OF Death (Red Lights of Death" or "Red Ring of Doom) on Xbox 360s is indicated by three flashing red lights. The red lights surround the Xbox 360 power button instead of the one to four green lights which indicate normal operation. The Red Ring of Death represents an internal problem, which requires a "reflow" repair for your beloved console.

Warning signs on the Red Ring of Death may include freeze-up’s, graphical problems in the middle of game play, sound errors, and the console will only responds when you press the power button to turn it off. These signs will occur until the eventually you will encounter hardware failure on your Xbox 360.

Here are some common reasons why the Red Ring of Death on Xbox 360s normally occur:

-failure of one or more major components

-Xbox 360 is not receiving enough power from power supplies and also caused by power surges

-Xbox 360 overheating

-Problems in GPU

Whatever the reason for seeing the Red Ring of Death, these flashing lights are never a good site to behold. So if the problem happens, whether you have a warranty or not, it will be best to consult an expert to fix the problem. By doing this, you will have the chance in saving your Xbox 360 instead of bringing it to its death.

There are temporary fixes that can be done but often they do not last very long and you end up having to take it in to a specialist for a repair called "reflow". This is where fresh solder is applied at a specific temperature, normally computer controlled. This is a difficult procedure for the average enthusiast to achieve. The reflow repair is by far the best solution, but be warned many manufacturers will not guarantee the work if you have attempted a temporary fix as this can sometimes do more damage to the components. So if you really love your Xbox get the best repair possible first time round, or you will be sending you precious friend to an early grave.