Cello Cases - Important Points to think about When choosing a Cello Case

Arts & Entertainment

  • Author Jody Roberts
  • Published November 13, 2010
  • Word count 430

The main goal of the cello case is to protect the instrument, bow along with other needed musical items from harm or damage. Often, soft cases are used by beginners and amateurs who do not have a lot committed to their instruments. Soft cello cases are often much lighter than traditional hard cases and for that reason a great deal simpler to transport and carry, however they lack the protective ability of the hard case. Also, they are more affordable, running in a variety of between $80 and $150

.

However, as you gets to be more proficient in playing and upgrades to some more expensive and better performing cello, a greater grade case is often desired so that you can sufficiently protect an investment. A typical hard case starts at around $450 and can reach to the 1000s of dollars. Many up-and-coming musicians choose a hard shell cello case that runs in the selection of $500 to $1000. The fluctuation in price is mostly due to the materials used and design complexity.

Weight is usually a concern for cello players. Hard shell cases can certainly run 20 pounds and, combined with weight from the cello, can be quite a load, specifically for a little person. This is one reason many go with soft cases which generally weigh five pounds or less. However, many state-of-the-art materials used today, like fiberglass, carbon fibers and Kevlar, make cello cases lightweight, as well as provide extra strength for protection. You will probably pay a higher price for such quality too.

A frequently overlooked factor in purchasing a good cello case is the hardware. Many times the rings, hinges, clasps and latches will need replacing well before the case on low-quality items. Make sure to check these out while shopping around and look for sturdy hardware that is attached well and may handle hundreds, otherwise thousands, of uses.

Also consider the quantity of padding within the cases that you’re considering. This will also vary with respect to the make and quality of the cello case. Look for something that has a good amount of padding which will keep your instrument from being damaged should it's dropped or bumped hard.

Ideally, you want several inches of padding between the cello and also the outside the case. You should also test the case with your own personal instrument in order to assess how well they fit in the case. The cello should fit snuggly to the padding without having any wiggle room and there should be sufficient Velcro straps or other support to guarantee the instrument doesn’t move while being transported.

Jody Roberts is an expert writer and has a passion for the Cello and Cello Cases. More information can be found here: http://www.johnsonstring.com

Article source: https://articlebiz.com
This article has been viewed 626 times.

Rate article

Article comments

There are no posted comments.

Related articles