Fuel Injector Cleaning - Why is it important

Autos & TrucksCars

  • Author Marisela Wlodarekl
  • Published November 26, 2010
  • Word count 377

It is imperative that you have thorough knowledge on how to take care and maintain your fuel injector, because the harmful and toxic substances get accumulated on the injector tip and would slacken the performance of the fuel injector. When the fuel injector which is sufficiently heated up is shut, the water pump stops circulating air.

This is when the fuel injector's temperature rises tremendously and the end part of the fuel injector is heated up and attracts fuel deposits. So what can be done to clean your fuel injector, so that you don't have a dangerous porous mass constantly forming? Here are 3 must know fuel injector cleaning tips....

Fuel Injector Cleaning

Cleaners - By adding a cleaner directly to your vehicle's fuel tank, you will be able to clean off the grunge that has built up on your fuel injector, however this is the least effective method of fuel injection cleaning.

Additives - Because this issue can easily occur, oil companies have produces additives which will keep injectors relatively clean.

The disadvantages of additives is that it adds to the already bad condition of the intake valve and hence it is imperative that you maintain your intake valves well and free from harmful deposits.

Brand name fuel - You may hate having to hear this, but brand name fuels actually allow your fuel injector to stay clean longer.

Though you would have to shell out extra money for these branded fuels, it prevents toxic deposits from getting accumulated in the injector.

Clean your fuel injector every 25,000 miles - it is suggested that you make an effort to clean your injector every 25,000 miles, so that you do not strain your vehicle in the instance that there is a buildup of deposits.

Many of the injector models were not successful in sorting out the problem, on the contrary it led to further problems

Lessen the burden of these injector cleanings by changing the model from the pintle to the seat, disc or ball design.

Adopting the disc design would lessen the formation of deposits, but it would not completely wipe out the problem.

As well you will need to replace your injector, if your regular fuel injector cleaning processes do not remove the buildup, so remember this respectively.

You should also take note of hilborn fuel injection

Article source: https://articlebiz.com
This article has been viewed 793 times.

Rate article

Article comments

There are no posted comments.

Related articles