When you turn on the heat in your house you just want to feel comfortable within your home. To be able to maintain that comfort is not cheap. However, there are simple so-lutions to help you. Increasing the efficiency with which your home is heated is easy to do, and can prove to be financially beneficial as well. The EdenPure heater offers a new technology for efficient heating of the home.

The EdenPure systems are quartz infrared heaters. This means they heat a room by re-leasing infrared heat, a method similar to how the sun heats Earth. Other heating sys-tems rely on combustion, which is the burning of a fuel, or resistance, which is running an electrical current through a coil or resistor. Both of these methods have significant drawbacks including: pollution, cost, uneven heating, and extreme heating of the mate-rials which compose the heater.

The method by which heating occurs within the EdenPure quartz heater is far different from other heaters. Infrared quartz tubes are heated using micro-electronic technology. This heat is absorbed by 3 copper furnaces in the same way a sponge soaks up water from its surroundings. This heat is then released as a "soft" heat which rapidly disperses through the air, as opposed to a burning heat which is the case with standard furnaces. This is a replication of the natural solar processes of the Earth where energy is absorbed, stored, and released slowly when environmental conditions warrant it. The relative humidity within the air allows the heat to be transferred quickly. The EdenPure heaters do not burn away the humidity. Losing the humidity from the air is both uncomfortable and unhealthy. Breathing dry air can cause problems such as asthma and allergies. Additionally, by maintaining a higher relative humidity within your home the air will feel more comfortable at lower temperatures, allowing you lower your heating settings.

Quartz heaters release an even steady heat throughout the room. Many traditional hea-ters will have a significant temperature gradient between the top and bottom of a room as hot air rises. This is both uncomfortable and inefficient. The infrared heating does not immediately collect near the ceiling of a room. Heat is evenly dispersed due to the method by which the heat is generated. The slow steady release of consistent heating allows for a better maintained environment. When a traditional furnace is turned on, a large amount of superheated air is released all at once. This air immediately rises to the ceiling in a room, which causes the cooler air to sink. This results in a room with unba-lanced heat distribution which will feel uncomfortable cold to anyone in the lower portion of the room, where people spend all their time, even though there is a significant amount of hot air which was just released into the room. Using infrared heating allows for a much more homogeneous environment within any room with no sudden infiltrations of superheated air.

Quartz infrared heaters provide a significant safety benefit over other heating methods: the materials which compose the heater do not become excessively hot. There are no hot surfaces with the infrared heating technology. Since the heating method does not rely on combustion, extreme temperatures are never created within the heater. The heat that is generated is dispersed in a rapid and even manner. The heaters feel warm to the touch, but will not reach temperatures which can burn any people or pets.

In addition to the safety benefits, these EdenPure heaters provide multiple health bene-fits. In addition to the humidity remaining in the air as described above, the air quality within your house will be improved as well. Typical combustion heaters produce signifi-cant amounts of dust. The infrared heating method requires no burning, and thus does not generate any dust which will be released into the atmosphere. The air quality also will be improved due to your standard furnace running less often. This will prevent the air filter from deteriorating as quickly, further reducing the amount of dust released into your air.

Another type of EdenPure heater using new technology is the line of PurATron fireplac-es. While they appear to be a standard gas burning fireplace, they actually make use of infrared heat as well. All of the features previously discussed still apply except the design of the heater is that of a fireplace. The heating method is unchanged.