Basic Troubleshooting Tips for Air Conditioning Systems

Home

  • Author Jon Van
  • Published August 1, 2011
  • Word count 516

Nothing is more frustrating than having a busted air conditioning inside your home during the scorching heat of summer season. It can really be a hassle and a big discomfort having a malfunctioning AC system during the time when you needed it most. Before it can be a pain not only in your head but also to your pocket, it is wise that you do some basic checkups and troubleshooting. Air conditioner service can cost you a lot. This is why it will be a great advantage if you know some do-it-yourself basic checkups and maintenance. However, not all are good at doing this quite complex job so almost always; hiring professional air conditioner service crew is done. But before you call professional help, you can try some simple and quick check or fixes. Here are some easy-to-follow tips for you…

• Check the filter – Air conditioning specialist reports that the most common cause of AC failure and the first thing that they check is the filter or filters. This is the frequent culprit of AC malfunction. A filter that is stocked up with dirt impedes the air from freely flowing to and from the system thus it causes the AC to stop performing properly. So if you have a malfunctioning or a not properly working AC, check the filters first. Before you call help, try to replace them and see if it makes a difference. Filters are inexpensive and they are easy and safe to manipulate.

• Check the thermostat – Check the thermostat. Most AC system have electronic thermostat. Check its batteries. Usually, it is hard to notice if the batteries are starting to decline in performance and the only time you will know it is when the AC has stopped working properly and a dead battery is the culprit. Sometimes, the simple task of replacing thermostat batteries is the only thing to do to bring the system back in business. Also, check if the thermostat is properly set. See to it that it is set on cool and is low enough to keep the system working.

• Cleaning – Dust, debris and other airborne particles that get stuffed inside your AC system can obstruct proper airflow. This can cause the system to work harder when it shouldn’t be. These obstructive particles impedes the proper functioning of the AC thus cleaning is essential. Sometimes, simple cleaning like sweeping or raking the inside of the unit is the solution to a malfunctioning AC.

These are just among the basic things you need to check before calling professional air conditioning service. More than just replacing the filter or checking the thermostat or cleaning the unit, another important checkup to do is the electrically intricate parts of the AC. Moisture and high voltage are two dangerous combinations that is why be very careful. Take time to read the manual and diagram and most importantly, shut the power off. Remove the covers and see the internal parts of the AC system. In case these basic tips don’t work, well, it’s time to call your friendly air conditioner service san Antonio.

For professional heating and cooling service, installation, and sales needs, heating and cooling San Antonio is the right choice. They are certified and reliable air conditioner service San Antonio that will answer your AC and heating needs.

Article source: https://articlebiz.com
This article has been viewed 463 times.

Rate article

Article comments

There are no posted comments.

Related articles