If you work with your PC system, suddenly realize that you move the mouse just to see that nothing is on your computer screen. The move is not a frustrating? You will find that a problem occurs with your PC mouse with some of the adverse times. If you see that is not your PC mouse works, you should understand that the problem with the mouse, the computer or with the operating system to be. If you catch the key of a good PC mouse, you are sure to get the best service for many years with few problems at times.

Problems will surely crop up a computer system when you are using it regularly. In that case you should contact a good online computer repair company. However, there are some ways which can help you out in not only identifying but also fixing mouse problem of your PC.

Cleaning Your PC Mouse

First, rotate the mouse after unplugging it. You have to turn in the ring counterclockwise and remove. You should also take away the trackball of the mouse.

Take warm water and clean the trackball mouse. Do not let it dry without the trackball. Take a cotton ball, dip it in alcohol and clean the rollers of the mouse. When you finish cleaning those things back on track ball mouse of your PC and replace the retaining ring back into place.

Take a cotton swab and some alcohol to clean the outside of your PC mouse. Be careful when cleaning is, you should use a small amount in a range. If you have an optical mouse, clean the surface and bottom with a damp cloth.

These are some of the simple steps that you have to follow for cleaning the mouse. But still if you have any difficulty in doing it, contact an expert PC repair service for remote tech support.

Fixing the Mouse Problem

After cleaning the mouse, plug it back in its correct position. You should check to see if there is a broken or bent pin. You should be very careful while using the connection and make sure it is done safely. Restart your PC and go forward with the examination of the mouse.

You can also use your PC mouse on a separate computer and try to restart the computer. If you see that the mouse works fine with the computer, then has to be a problem with the computer system or with the operating system.

Your computer mouse can cause a problem if you install a new device on your PC. To check whether this is the case, you should start the newly installed drivers and hardware and computer. If it is because of the new hardware, the problem is easily fixed by uninstalling the hardware. Then install the driver from the PC mouse in the Control Panel.

Pull out the mouse from power outlet and restart your PC. After rebooting, plug in your mouse and let Windows install the drivers. Remote tech support services can provide the real support.