By understanding the basics of your kitchen installation process, you will feel confident that you will be able to get the job done without making any costly mistakes.

To start off, I suggest that you become very familiar with your new kitchen layout as this will help you to visualize what the end product will look like. By drawing the layout directly on the walls, you will get a better understanding where each cabinet is going to be. This will definitely help you to understand how to install upper kitchen cabinets as well as the base cabinets. Having access to the professionally drawn up layout is very important because it will give you the visual confirmation as to how the kitchen will look like after you have it installed.

By drawing the layout on the walls, you will visualize where each and every cabinet is to be placed. Go through each cabinet to make sure that you have all of the cabinets that should have been ordered for your new kitchen. Check to see that there are not any electrical outlets or switches that might have to be moved in your new design, and make sure that the wiring for all of the appliances are positioned in their proper locations. Relocation of any outlets or switches should be taken care of now. Your qualified electrician will be able to move any wiring for you without much trouble. It is just important that you make sure everything is where it should be before you start with the installation.

So, now that you have made sure that the wiring and plumbing is located properly, you will need to find the high point of the floor. And just to make a point here, it is always best to have any new flooring installed before you start placing cabinets in the new kitchen. Do this beforehand so that the rest of the kitchen installation goes smoothly. Just be sure to protect the floor during the installation process. But so you know, there are two types of flooring that will have to be laid later, a floating floor and a perimeter glued vinyl. By placing the cabinets directly on these type of floors will not allow them to move freely as they are supposed to do.

Once your floor is down, measure up from any spot of the floor against a wall and place a mark at thirty inches. Carefully draw a level line around the walls where the cabinets are going to be placed. Measure up every two feet and find the smallest measurement, and mark where that location is. This is the high point of your floor. Measure up from the floor at this location thirty four and a half inches and redraw a level line where the cabinets are going to be installed. This will serve as a reference point for the rest of the installation of the kitchen cabinets. There is a lot more to learn about how to install kitchen cabinets than just drawing lines on the walls and fastening the cabinets in place. I have put together a comprehensive resource that covers all of the details that you might encounter in your kitchen remodel.