Each kid loves a place to escape and arrange their individual. For the reason that we have wood all over our house was not challenging for a band of trees that we have to to discover. If in your case you do not have the same luck, you can benefit equivalent theory of building, but with 4x4 posts sunk into the base as well.

A trip to the lumber yard of material, including, six 2x4x8, 8 4x8 sheets of 1 2 "plywood, 1" wood screws, 2 "wood screws, 12x12 tarp, four bungee cords, six mini hinges, 2 medium hinge, a slide lock and red marking aerosol paint |. Before you add the alternative end to the tree that you take a level and ensure that your tree household will not be running down hill |. One foot on top of the roof of your house you will add up your part of the tarp in and attach bungee cords to the four trees to cover you from the fundamentals.

Goals trees from the ground up to the amount of the ground you choose your tree house to be and brand it with paint. Following you have marked all four of your trees lay your 2x4x8 on the floor and use your Bosch compound miter saw and Bosch Compound miter saw stand, cut two of your 2x4 in half giving you 4 2x4x4's. In a ending and someone to assistance hang on to the wood take 2 of the 2x4x8 pieces and attach using the 2 "wood screws to the tree with your paint brand as a guide. 2 of 8 With 'trees now with the beginning of a wooden frame you take April 2 "pieces and add them at both ends inside the trees.

Book a piece of plywood and place it on bodywork and get hold of down to 2x4's with 1 "wood screws and be absolutely to swallow all the screw heads so they will not be a danger |. The afterward step is to determine 8'from deck up the 4 trees and check all over again with your paint. You now have the lower frame made for your floor. Repeat the process of increasing the 2x4's over you. When it is finished, you will demand help lifting one of the plywood sheets on top of the frame and screw down firmly, this will serve as your roof. Use the remaining 6 sheets of plywood and fit your walls before you do that you should cut a rectangular window of three panels avoid the cut out piece and a door on a board in turn saves the part cut.

Economize hinges and cut square pieces of the window, add the hinges to the mini panel outwardly of the top window frame and you now have a window you can prop open with a piece of wood for airing. Remove the average and hinges attach to the side of your doorway and the slip lock in the middle of the opposed door and hang up your hinges outwardly.