Interior Design Using Flooring Choices

HomeHome Improvement

  • Author Pat Boardman
  • Published November 15, 2011
  • Word count 596

You may want your home to have an exciting new feel to the overall design scheme. New floors are instantly noticeable; they add a clean effect that guests are sure to admire. For wood floors there are a number of species available that can be considered. Flooring showrooms and websites abound as selection information points. This article discusses hardwood and the other flooring choices to match new interior design.

Getting the right design for a room takes good taste, a good budget, and the right materials. To achieve something pleasant to walk on for the feel of comfort for visitors is a major element that's more than just visual. The impression can be conscious or brought around out the general ambiance of the room subconsciously. Whether you put in shiny or earthy floors, like everything else color and materials will complement each other when the design is created.

The end result can even be achieved by using design software web site subscriptions that are only about three dollars per month. This would allow a layman home owner to drop-and-drag pieces into place and select colors, layout, window frames, fireplaces, floors, ceilings, wall, and everything else that an interior designer would do.

Hardwood floors are typically made from Maple, Red Oak, White Oak, and exotic Woods (exotic is defined as not indigenous to North America, often from endangered rainforest trees. For less luxurious areas there is laminate and parquet flooring, often in areas like recreation rooms, basements, and kitchens. There are also a wide variety of natural stone floors with beautiful designs in every imaginable color for the best rooms in the house.

There is a product called engineered hardwood flooring that's made up of a core of hardwood, plywood, or HDF and a top layer of hardwood veneer. The veneer is glued onto the top surface of the core; it's available in most of the hardwood species.

If there are a lot of stone veneers on the wall or window areas then stone flooring may turn the room into a museum so it might be a good contrast to put in hardwood or engineered hardwood depending on the climate and budget. Engineered wood flooring is designed to resist high-moisture environments like basements and kitchens better than pure hardwood floors. If you live in areas where flooding or tremor occurs this flooring would be able to provide greater stability than pure hardwood flooring. Engineered planks and strips can be installed over radiant heating.

One material that is a modern improvement on ceramic tile is porcelain tile which is denser, less prone to moisture and staining than ceramic so it can be used indoors and outdoors. The tile material is made up not of clay of finely-ground sand and fired at much hotter temperatures under high pressure, resulting in a stronger and less porous surface for the new floor.

When a flooring material choice is made such as oak or maple for a room that contains a baby grand piano and wooden window frames then you should shop around for hardwood flooring prices to get the best quality for your budget. Perhaps you have a mahogany table then you could use a mahogany trim around a maple floor for best effect. Colors can be varied by using stained wood.

One thing that is challenging in the flooring element of interior design is to get the rooms flowing together naturally, and the floors are the most noticeable border line. This adds some limitation and can force a plan to be re-thought; this can sometimes bring inspiration instead of delay.

SEO Pat Boardman writes in reference to Toronto hardwood flooring supplier Future Flooring who provide solid wood flooring and display a full range of flooring options at their Richmond Hill showroom in the GTA.

Article source: https://articlebiz.com
This article has been viewed 832 times.

Rate article

Article comments

There are no posted comments.

Related articles