New slot machines are much more advanced as compared to traditional table games including craps or blackjack. These new slot machines are considered to be a great revolution in poker world. New slot machines enable every one to start his game with even very small bet and no gambling knowledge is required to play new slot machines.

New slot machines are considered to be the best gaming machines giving good annual gaming profits of about 60% of annual profit of gaming and offering the most profitable poker games. This fact was declared by United States. The technology of the slot machines has been changing since last many years. Previously mechanical slot machines were used and new these older mechanical slot machines are replaced by fully computerized modern slot machines.

No doubt that more technology has involved in new slot machines but the basic concept of the game is still the same. To start playing, the players are required to pull the handle of the machine .when the handle of the machine is pulled, there is a series of reels which starts rotating. Normally there are three reels having printed pictures on them. A player wins or loose when the picture is placed against the pay line. A player wins when the reels show the same winning pictures at each line. Payout depends on the picture on pay line. In this article, you will find the movement of the reels in new as well as in old slot machines. You will also find the odds of winning in this article.

The old traditional slot machines were designed with gears and levers. In these machines, the metal shaft supports the reels and acts as central element of the machine. This metal shaft is connected with the mechanism of the handle which moves the things. The spinning reels stop because of the braking system of the machine. There are sensors which communicate to the payout system of the machine regarding the position of the reels. There is also a coin detector attached which unlocks the brakes to move the handle of the machine once the coin has been inserted. Many approaches have been tried by the slot machine manufacturers since many years and design of the machine has been changing as well.

In new slot machines, three reels of the machine are mounted on a central metal shaft and this metal shaft is also used to support the notched discs. These notched discs are connected to the three reels of the machine. There is a second shaft below the central metal shat which supports the kicker. Kicker is a piece of metal having three pedals. These paddles are lined up in a way and they push against the notches. The second shaft of the machine is also used to support the stoppers. Both the stoppers and kicker re connected to springs holding them in particular position. When a handle is pulled, a series of actions take place.