We need to configure the D-link router setup and once the configuration gets completed, we need to set up all our wi-fi connectivity processes after that we can connect the internet through the D-link router.

Note:

Before, proceeding we just need to get sure that our system is connected to the router through an ethernet cable or in wireless mode with a smartphone device. Because the IP address 192.168.0.1or 192.168.1.1 is a local web console, which enables us to access the dlinkrouter. local or www. dlinkrouter.local router’s admin page. That will happen if and only if our system and mobile device connected with the dlink router by wire or wireless mode.

Follow these steps to log-In in D-link router Login page:

Now, open your search engine whatever you have either Chrome, Mozilla Firefox, Internet Explorer or Microsoft Edge, and navigate the following IP address:

192.168.1.1

192.168.10.1

192.168.0.1

Mostly, the Preferable gateway is 192.168.0.1 or else access the link dlinkrouter.local or www.dlinkrouter.local that redirects you to the D-Link login page

Enter Login Credentials

Once you redirect to the dlink router login page one pop-up will display on your screen which asks you for Login credential: the username and password to access the router’s mydlink page.

In D-link by default the username is admin and the password is blank (not required), if you had not change it yet. For to get sure about the default login username and password details, check the router by turn it into the backside there you will see one sticker is there on that you will get the router's IP address and their login credential. That’s your username and password, with that you complete your Dlink login (wi-fi router login).

If that login credential will not work for you then you can use username as “admin” and password “admin”. After entering this information you will redirect to logged in into the mydlink login page and the home page will appear Infront of you, in that web console page of dlinkrouter.local.

Configuration

Now, you are entered successfully in the admin panel, now you can change the setting of the router model. you can do all the reset activities, change the router settings such as change password, change SSID, Change username of the router, and many more. Using the customize setting tab prevents any malicious intruder to enter your private setting panel.

So, before making any change note down all the current setting details as it is. This will help you to revert to the previous setting mode easily if things are not working as anticipated.

Why can't I connect to my router admin page?

Whether you are going to access your wireless router setup or want to view the wi-fi password from previous setup access you need to access router’s admin panel of dlinkrouter.local. If you can’t reach the admin panel page then these are the following reason:

1. Hardwired connection (Ethernet cable mot connected properly)

2. Entered IP address incorrect

3. IP address issues in your system

4. Entered incorrect username and password

5. The Issue with the wireless router itself

6. Hardwired connection (Ethernet cable mot connected properly)

• First of all, make sure that your computer is connected with hardwired and directly connected to a router or not and check out that all the hardwired well connected to the port of the router or not

• One of the quickest and most preferable techniques is the power cycle process. Power Cycle means to remove the connection from the dlink router setup and power point wait for a couple of minutes and then plugging in the power back.

• If the LED light turn on then your router is perfectly working otherwise you have to call the service centre

2. Entered IP address incorrect

Let’s make sure that you have entered the correct ip address. Don’t make mistake while typing the ip address like https://www.dlinkkrouterlocal.com, https://www.dlinkkrouterlocal.com/, 192.168.1.1.com, 192.168.o.1 use either 192.168.1.1 or 192.168.0.1. or try both it’s your choice. There is no need to enter http:// or https:// Infront of the ip numbers or else go dlink default gateway link dlinkrouter.local or www.dlinkrouter.local for more convenience.

3. IP address issues in your system

The computer IP address should be the same as the subnet as the router’s IP address in order of convenient communication between the two of them. For example, If the router IP address is 192.168.0.1 then of course the IP address of your system should start with 192.168.0., if IP address is 192.168.1.1 then it should be 192.168.1.. Otherwise, there is no possibility of communication between the router and your system.