Drivers are at Risk from Malfunctioning Tires

Autos & TrucksMaintenance

  • Author Peter Kent
  • Published January 8, 2008
  • Word count 1,186

Tire failure has been the cause of more than 8,000 serious traffic accidents yearly, according to the National Highway Traffic Safety Administration. These accidents have either caused serious injuries, or even death. This statistic is frightening as most of these tire failures put the manufacturers directly at fault. These could be due to some manufacturing or possibly design defect. Drivers are often unaware of the dangers of defective tires, despite the fact that manufacturing companies may be familiar with the instability.

Tread Separation Causes Fatal Accidents

One of the most common tire failure occurs due to tread separation. Tread separation is the result of the plies of a tire separating from one another.

An assembled tire is exposed to high temperatures and pressure to cure the assembly, which bonds all the layers. A steel-belted radial tire may have a steel belt incorporated into it to have greater puncture and impact resistance. Unfortunately, the rubber compounds cannot stick to the steel belt addition if the manufacturer does not cover the steel wires before using them in constructing the tire, which makes it possible for tread separation in all steel belted tires. The possibility of tread separation becomes greater as the speed of the vehicle increases.

Currently, light truck tires and passenger tires do not use new technology that has been designed to prevent tread separation from occurring. This new way to manufacture tires has been available for years, but it has not been used because it adds expenditures to production. With better-designed tires, a nylon cap adds a layer between the steel belt and the road to help the tire better withstand moisture and roll with more stability.

Multi-Piece Rims Pose a Serious Threat

Another type of tire failure that can occur is when a multi-piece wheel is used. The Occupational Safety and Health Administration wanted to ban multi-piece rims, but the tire and wheel industry sponsored an education program at work and ultimately avoided the ban. OSHA guidelines require using a safety cage during tire mounting operations, but after the wheel is removed from the safety cage, accidents still happen. Posters that were designed for the education program are now in most service stations and tire shops, but this educational program has allowed manufacturers to avoid complete liability by foisting some liability on to businesses, who in turn pass costs along to employers and their injured employees. Though a single piece wheel that would avoid multi-piece rim explosions has been around for decades, the design has not been widely used.

Sidewall Zipper Failure

When tires are being inflated, the sidewall of the tire can explode, causing a sidewall zipper failure. Sidewall zipper failures can happen because of the design and manufacturing of the sidewall. Deflating a tire can add stress when the tire is re inflated and cause a blowout. Manufacturers deal with this tire failure by issuing warnings instead of changing the tire designs. Bead failures also occur during the inflation of the tire, and the explosion bead failures cause often times result in serious and deadly conditions. Bead fractures usually occur at the splice joint of the tire, which, combined with the low-pressure explosion, causes the trajectory of the rim and the tire to sever limbs, cause brain trauma, and smash facial bones. High-speed spin-off failure can also be a cause of tire failure. This happens when one of the two back wheels remains immobile while the other one spins uncontrollably, which is due to a defect in the design. One uncommon type of tire failure is ozone cracking in which small cracks on the rubber's surface come from atmospheric ozone which destroys the sidewalls. Manufacturing defects are normally to blame in cases of ozone cracking.

Tire Blowout Injury

Tire blowout injury occurs when motor vehicle tires rapidly lose air causing a loss in vehicle control and, potentially, a rollover accident. Tire blowout injury can be catastrophic as tires deflate in an explosive manner, severely compromising or destroying the tire's integrity. A number of consumer advocacy groups concerned about the dangers of tire blowout injury have urged the government to enact more stringent protocol on tire design, production, and maintenance.

Tire blowout injury is sustained when tire blowout causes the loss of vehicle control which makes vehicle rollover and collisions with other objects more likely. People are at a greater risk of tire blowout injury when traveling at higher speeds. Being in a less stable vehicle is also a major factor which contributes to tire blowout injury. SUVs are more likely to be involved in tire blowout accidents for several reasons. SUVs are narrower and taller than other passenger vehicles; therefore they are less stable on the road. When tire blowout does occur, SUVs are much more likely to rollover causing more serious tire blowout injury. SUVs are also more difficult to control after tire blowout which causes the risk of more serious accidents and tire blowout injury.

In 2000, national concern about tire blowout injury peaked as the Firestone-Ford scandal unfolded. Firestone radial tires on Ford Explorers were found to be especially prone to tread separation, which caused numerous cases of tire blowout injury and death. In August 2000, Firestone-Bridgestone recalled 6.5 million defective tires and in May 2001, Ford recalled 13 million defective tires from their vehicles. Consumer group research shows that tire blowout is not particularly unique to one type of tire or vehicle, meaning that other tires and vehicles may pose an equal threat on our roadways. There are several causes of tire blowout injury that are highly preventable. It is nearly impossible to create a tire that has absolutely no risk of causing tire blowout injury, but there are many things that can be done to reduce the risk of tire blowout. The causes of tire blowout include road hazards, maintenance issues (such as under-inflation, overloading, tire mismatching, excessive wear, and inadequate inspections) and tire design or manufacturing defects.

Tire blowout injury is often due to negligence on behalf of tire manufacturers or tire repair and maintenance professionals. Tire blowout injury can be prevented if manufacturers are impelled to create a safer more robust tire design, improve overall vehicle design and control systems, and implement a more stringent production and inspection process. Improved tire design and more stringent tire repair and maintenance protocol for service professionals would reduce the likelihood of tire blowout injury.

Preventing Tire Failure

Tire failures can be prevented with proper maintenance, but in some cases tire failures are hard to detect because of a manufacturing or design flaw. By knowing what to look for, you may be able to prevent unnecessary injuries. Signs to be aware of include:

  • Cracks in tire sidewalls

  • Tire vibration, indicating a misalignment, etc.;

  • Treads which are unevenly worn down (indicating improper inflation) or very worn down;

  • Bulging sidewalls (indicating weakened areas).

Have You Been Injured by Faulty Tires?

If you have suffered injury due to faulty tires, blowouts, or related defects, you may wish to contact a qualified attorney who can advise you of your legal rights and options. An experienced crashworthiness attorney will help you file your claim and get the monetary compensation you deserve.

For your source for everything legal on the web, visit LegalView.com. At http://www.legalview.com , you can gain admission to an entire legal database that includes an attorney referral service available to you at no cost. Visitors who use this service can use the resources to find information on a variety of legal issues and contact expert attorneys such as a traumatic brain injury lawyer or a mesothelioma attorney. Visitors can also find an auto accident lawyer at http://crash.legalview.com/ .

Article source: https://articlebiz.com
This article has been viewed 1,228 times.

Rate article

Article comments

There are no posted comments.

Related articles