Steps to Carry Out Home Beer Brewing

Foods & Drinks

  • Author Keith Whitley
  • Published February 6, 2010
  • Word count 592

Beer is the most widely served and enjoyed beverage in the celebrations. It suits all occasions, but it should be taken within the limits. Home beer brewing or in other words making beer at home is a very popular pastime. It is a simple task that is also affordable.

Beer is an ideal drink. A mug of beer with ice cubes in it will slack your thirst and also do more. It will make you feel rejuvenated and fresh everytime you drink it. You can serve beer on all events like watching some sports or freaking out with your friends at parties, It will add up to your fun and excitement. Beer is available in various types to suit diverse preferences. Someone may like strong beer, whereas others may like a mild one. You may like the sweet flavor but a few others may love its bitter taste.

And to savor beer that just matches your taste, you should go for home beer brewing. To carry out the brewing task there are some prerequisites. First and foremost buy some home brewing supplies from local or online stores. The main requirement for home beer brewing is a fermenting apparatus.

Beside this you will need stainless steel brewing pot, a fermentation lock, rubber carboy stopper with hole for fermentation lock, sparge bags, large plastic funnel, measuring cup, hydrometer or thermometer, bottle of unscented bleach for sanitizing all equipment, container with a sturdy base and a plastic hose.

First and foremost sterilize every vessel except the sturdy container. You can do so by mixing the unscented bleach in cold water. As for the fermenting container rinse it with this solution and wash with clean water thereafter. The other containers can be soaked for sometime in the sink with this solution.

Now crack the gains you need to make your specific beer in the sparge bag. Then soak them in the brewing pot and put on the burner. After the water boils, mix the malt extract into the brewing pot and let the solution come to boil once again

Now put the bitter hops in the sparge bag and steep for 30 minutes. This will bring out the necessary oils. Put the finishing hops in the sparge bag too for 1 - 10 minutes, depending on the recipe. Stop boiling. Now fill the glass fermenting bowl half way with water. Make a bath of ice water to cool the boiled solution. Take 6 ounces of cold tap water in the measuring cup and add dried yeast packets to it. After the brewing pot is cooled transfer the solution to fermenting container. Fill the fermenting bowl with water fully. Splash water on the fermenting container and shake it while filling it. Take a hydrometer and record the temperature of the fermenting bowl. If it is below 75 degree Fahrenheit add the yeast. The next step of home beer brewing is to place the fermenting container in the shade outside. Take the sturdy container fill it half way with water. Get the sterilized tube and put one end in the fermenting container and the other end in the sturdy container. This creates air tight blow off tube, the excess foam escape during initial fermentation.

You will see that the foam will flow out the top and into air will bubble out of the container. After three days you can you can remove the tube and place in the sterilized stopper and air lock. When you find the airlock has stop bubbling, bottle the beer. This is the last step of home beer brewing.

Keith Whitley is author of this article on home beer brewing.

Find more information about beer brewing supplies here.

Article source: https://articlebiz.com
This article has been viewed 657 times.

Rate article

Article comments

There are no posted comments.

Related articles