My Product Line Went to Hazard Based 62368-1, and All I Got Was This Lousy CB Report


  • Author Paul Milton
  • Published October 9, 2018
  • Word count 985

The objective of this article is to offer an alternative to the CB route of compliance to meet the new European safety standard EN 62368-1 Audio/video, information and communication technology equipment - Safety requirements for equipment having an existing IEC 60950-1 CB certification.

The EU has extended the mandatory implementation date of the new hazard-based standard, EN 62368-1 to December 20, 2020, which means that Information Technology Equipment (ITE) shipped into the EU after this date will require compliance to the new standard whether it is currently certified or not, i.e. no grandfathering. For companies with many products required to go through transition, this can be an expensive and time-consuming process.

In this Article we will compare two methods of upgrading products to the new hazard-based requirements of the Low Voltage Directive (LVD). The aim is to analyze whether the potential benefits of an alternative compliance route can outweigh those of the more conventional method. The two methods in question are:

•Conventional update of existing CB Scheme certifications (CB update approach), or

•Alternate path of producing new Low Voltage Directive (LVD) reports (LVD report approach)

The LVD is part of Europe’s CE marking platform. No matter which method is chosen to demonstrate compliance with the LVD, the CE mark rules mandate, for all practical purposes, that the manufacturer self-declare compliance with the requirements. This means that even if a CB certified body triple stamps the certification documents, the responsibility of conformity with the LVD still rests on the manufacturer, i.e. Self-Certification.

Many ITE manufacturers routinely obtain CB Scheme certifications for their products. The main advantages of CB certification are:

1.Can, generally speaking, be relied upon to declare compliance to the EU’s Low Voltage Directive (LVD);

2.Can serve as a "passport" for other international certifications;

3.Relative ease of tried and true certification process (for most types of computer related equipment); and

4.When bundled with NRTL (e.g. UL, CSA, MET) certifications for U.S. and Canada, does not add significant cost to a project.

The passport concept implies that CB certificates can be "easily" leveraged to obtain other international certifications. (More on this idea to follow.)

An LVD report is similar to a CB report with the exception that it is exclusively used to declare compliance with the EU’s LVD. Another advantage of the LVD report is that it can be produced by anyone from a CB certification body to the manufacturer of the product in question.

In the instance where products must be upgraded to meet the new European requirements, some of the advantages mentioned above for CB scheme certification are negated. Let’s take bundling for example; The US and Canada have also adopted the EU implementation date of new hazard based standard, but unlike the EU where compliance becomes mandatory, the NRTL’s will only require new products and those with significant changes to comply with the new standard. This means that if a current product remains the same, in basic layout and function, the existing NRTL certification to UL/CSA 60950-1 should not need to be updated. Without the NRTL bundling, the cost of CB certification alone becomes significantly higher.

Another area where the CB update approach is marginalized is in the ease of the certification process. One must keep in mind that not only is this process new for manufacturers, it is also new for certification engineers. These engineers do their best in applying the requirements of the standard, but they are human and mistakes will occur. By the time most manufacturers fully commit to updating their existing products, the deadline fueled influx of work will necessitate that laboratories have "all hands on deck", the good, the bad, and the ugly. Consequently, manufacturers run a considerable risk of being assigned a project handler of the bad or ugly variety, who may misinterpret the new requirements. Any non-compliances found during a CB evaluation must be corrected to the CB body’s satisfaction regardless of actual validity. The back and forth communication to resolve these perceived non-compliances will waste valuable time. In general, since the LVD report approach is strictly used for self-certification purposes, it allows the manufacturer greater involvement and accountability for the certification process and enables projects to be completed in shorter time frames.

Because the LVD report does not require the exclusivity and overhead of a CB certification body, the cost and time to obtain one can be significantly less.

To complicate matters, the European upgrade upheaval, pulls the rug out on the CB passport concept. The main advantage of a CB Scheme certification is the ability to leverage it to gain certification in certain international markets. As of now, many international markets do not accept the 62368-1 base standard and most are uncertain as to when they will accept it. This means that a CB Scheme certification to the new standard may not be accepted as a "passport" for some time after the transition date, but existing CB certifications would still work. For example, if China does not convert IEC 62368-1 into an official Chinese GB standard, a CB report to that standard will be useless in obtaining Chinese CCC certification, but the existing CB scheme to IEC 60950-1 would still provide value.

You may be thinking, "What if I upgrade my existing product line using the LVD self-certification route instead of CB certification, and subsequently international markets to which I sell adopt the 62368-1 base standard: Will I have to upgrade to a new CB certification at that time?" This question requires some explanation of the value of the CB report as a passport. In general, no certification body requires CB certification as a pre-requisite to obtaining their national certification. The value of submitting a CB certification varies greatly from Certification Body to Certification Body. Some country Certification Bodies will accept CB reports carte blanche, and some will only use them as a reference.

Paul Milton has been managing product certification programs for over 25 years. He works for G&M Compliance, Inc., who specializes in Homologation management services, offering certification solutions and providing unique outsourcing services. Paul can be reached at

For more information, please visit:

Article source:
This article has been viewed 361 times.

Rate article

Article comments

There are no posted comments.

Related articles