What Are Through Hole Resistors?
- Author Andy White
- Published September 14, 2024
- Word count 770
1.What Are Through Hole Resistors?
In this section, we will provide the basics of through hole resistors for you, helping you understand the definition, structure, operating principle, features and applications of them.
2.Definition
Through-hole resistors are a type of resistor designed for insertion into pre-drilled holes on a printed circuit board (PCB). They are used to limit current flow and manage voltage within electronic circuits, which are characterized by their long leads that pass through the PCB and are soldered on the opposite side. Many distributors offer a wide range of components of Hole Resistors to cater to diverse application needs, like
3.Structure
Body: The main component of the resistor, which consists of a cylindrical or rectangular ceramic or plastic core. This core is coated with a resistive material, such as metal oxide or carbon film.
Leads: Two metal wires extend from either end of the resistor body. These leads are inserted into the holes of a printed circuit board (PCB) and are soldered to secure the resistor in place. The leads are usually made of tinned copper or other conductive materials.
Resistive Element: The resistive material on the core determines the resistor's resistance value. This material is typically coated onto the ceramic or plastic core and is often made from metal oxide, carbon film, or wire-wound elements.
Insulation Coating: The resistor body is coated with an insulating material, this coating can be made of epoxy or other insulating compounds.
Color Bands: On many through-hole resistors, especially fixed-value ones, color bands are printed on the body. These bands indicate the resistor's resistance value, tolerance, and reliability according to a standardized color code.
4.Operating Principle
The operating principle of through-hole resistors is based on Ohm's Law, which states that the voltage across a resistor is directly proportional to the current flowing through it, with the resistor's resistance being the constant of proportionality. When an electric current passes through a through-hole resistor, the resistive material inside the resistor opposes the flow of current, thereby converting electrical energy into heat.
5.Features
-
Available in cylindrical or rectangular forms, with sizes like 1/4 watt, 1/2 watt, and 1 watt.
-
Covers values from a few ohms to megaohms, following E12 or E24 series.
-
Common ratings include 1/8 watt, 1/4 watt, 1/2 watt, and 1 watt.
-
Accuracy is expressed as a percentage, such as ±1%, ±5%, or ±10%.
-
Indicates resistance change with temperature, typically in ppm/°C (e.g., ±50 ppm/°C).
-
Made from carbon film, metal oxide, metal film, or wire-wound materials.
-
Leads are inserted into PCB holes and soldered, providing mechanical stability.
-
Used to indicate resistance value, tolerance, and reliability.
6.Applications
Through-hole resistors are widely used in various electronic and electrical devices. They are commonly employed in power supplies, signal processing circuits, and analog devices where precise resistance values and power dissipation are crucial. Additionally, they are found in consumer electronics such as audio equipment, lighting systems, and household appliances, where they help control current flow, set operating conditions, and protect sensitive components from damage.
7.How to Select a Through Resistor?
When selecting through-hole resistors, the first step is to determine the appropriate resistance value. Next, consider the power rating, as the correct rating ensures the resistor can safely handle the generated heat. Common power ratings include 1/8 watt, 1/4 watt, 1/2 watt, and 1 watt.
Additionally, choose a suitable tolerance level to ensure the resistor’s actual value remains within an acceptable range from its nominal value. The temperature coefficient is also crucial, as it affects the resistor’s stability under varying temperature conditions. Finally, select the appropriate material and type based on the application environment, such as carbon film or metal oxide.
8.How to Install a Through Resistor?
To install a through-hole resistor, first, position the resistor’s leads through the designated holes on the PCB (Printed Circuit Board). The leads should fully be inserted. Next, bend the leads slightly on the underside of the PCB to secure the resistor in place. Proceed by soldering the leads to the PCB. Finally, trim any excess lead length to avoid potential short circuits.
9.FAQs
How do I determine the correct resistance value?
The resistance value is typically indicated by a color code on the resistor. You can use a color code chart or a multimeter to determine the resistance value.
What is the significance of the power rating in through-hole resistors?
The power rating indicates how much power (in watts) the resistor can safely dissipate without overheating.
What materials are used in through-hole resistors?
Through-hole resistors can be made from various materials, including carbon film, metal film, and metal oxide, each offering different characteristics in terms of stability, tolerance, and temperature coefficient.
A professional global electronic component distributor offers various kinds of high quality electronic components, and they are ready to ship same day with no minimum orders.
Article source: https://articlebiz.comRate article
Article comments
There are no posted comments.
Related articles
- NOSEBLEEDS, NEIGHBOURS, AND NEW YORK: HEIDI'S ARTISTIC RESURRECTION
- Top-Tier Real Estate Videography in NV: Boost Your Sales with Stunning Visuals
- Find In-Home Senior Care Services Near You in Alabama: Expert Respite, Personal, and Dementia Care Solutions
- Elevate Your Entryway with a Statement Wall: Carved Wood Panels
- What Are the Comprehensive Senior Home Care Services in Prichard, AL for Trusted Respite and Dementia Care?
- Electronic Document Management System: Efficiency and Challenges in the Digital Age
- Best Air Conditioning Repair Service Queen Creek Florence Arizona
- How to Choose an Airport Transfer Service: A Guide for Stress-Free Travel
- Wirral Private Airport Transfers: Comfort, Convenience, and Class
- North Wirral Airport Transfers by Ventus: Trusted Travel from Coast to Terminal
- The Importance of Reliable Airport Transfer Services
- Find the Perfect Fireplace for Your Home
- The Pros, Cons, and Ethical Dilemmas of Employee Computer Activity Monitoring Software
- Over 40 and Ready to Mingle? Why Now Is the Best Time to Start Dating Again
- Whu buy an apartment in Manilva
- Best Electric Humidor: Top Picks for Effortless Cigar Storage in 2025
- They Tried Magic Mushrooms for Mental Health
- Sacred Balance: 5 Elements Chakra Healing with Mala Beads & Yantras
- Rooted in Heritage: The Rich Ranch Aesthetic with Antique Doors and Rustic Soul
- Carved Floral Barn Doors: A Shabby Chic Statement for Your Pantry & Laundry Room
- Confusion and Anxiety: Lincoln and the Days Before the Civil War
- How Website Maintenance & Security Protects Your Online Presence
- 5 Best Mortgage Brokers for Bad Credit UK
- 7 Best Mortgage Brokers in Derby
- Maximising Space and Efficiency: The Power of Dual-Purpose Fitness Machines
- Types of Eco Friendly Food Packaging
- Where Can You Find Lighting Stores in Brampton to Illuminate Your Home & Office?
- What Are the Top Real Estate Videography and Photography Services in CA?
- The Rise of Employee Performance Monitoring Tools: Balancing Productivity and Privacy
- Trends in Travel Security Technology