Once you have begun making your dress, you want to stitch your porcelain doll sleeves. To get started, affix the lace, meeting it with the edges of the sleeves and crisscross. Press once you finish. Next, gather the dual rows of your stitch and continue about the crown of the sleeve until it fits into the right armhole, coming together, pull the collected fit up, and stitch them collectively whilst keeping your face liberated. Do the same to complete the opposite sleeve.

Starting at the right sleeve joint with the bodice, sew the seams of the underarm from the edges of your sleeve and from side to side seams of the upper region of the dress. Now begin stitching the seams at the side of your bodice so that it faces jointly and moves to face a different direction within, covering the side facing seams. You may need to cut to fit the areas around the seams of the armholes, including the facing holes. Change directions, turning in the hems about the facing armhole, match the shoulders as well as the seams at the side, and then "slip" suture the facing in the region of the armholes, moving in the opposite direction as you stitch. Use the elastic hat and fasten it to the interior region to create the starting legs of your underclothing. You may need to cut to fit, yet add glue before you begin cutting.

Now you have completed your sleeves for your porcelain doll. Once you finish your sleeves, you may want to design and elegant skirt to fit your doll, as well as an apron. To get started with your skirt finish your patterns at the untreated edges, and at the seams of the back using the crisscross stitching method. Next, sew the seams at the back from the dot and to the hems. Line up dual lines and gather your stitches about the crown of your skirt. Fold the back seams and permit to the left side on mutual sides of your seams at the back.

The bodice and front middle of your skirt should come together, as well as the fold lines at the back of the upper region of your dress. Extend to the opening at the back of your skirt and keep the facing bodice liberated. Collect your thread by pulling up and extend to fit the skirt connecting it to the bodice and distributing the collected sections uniformly. Next, trim or shape the seams and fold an upward hem on the facing upper region of your dress so that it corresponds with the seams at the side of your bodice. Use the "slip stitch" method and stitch the seams along the facing so that it connects with the bodice and the skirt.

Now you are ready to dress your doll. As you put the dress on the doll note any areas that may need length added, and mark the seam lines. Finish the dress at the untreated edges of your hem and crisscross. Next, turn the width to needed size and hem while using the slip suture method to fit the skirt. You can make buttonholes next. To start hand sow or machine stitch your buttons after adding glue to the fabric to hold it together. Use a pin to make your buttonholes. Allow the glue to dry and then cut the region, using craft scissors. The buttons or press "000 studs" can be used and sown at the back of your skirt.

You are now ready to create an apron to fit your porcelain doll dress.