Power augers have several uses in the field of construction and utility industries. There are also numerous mishap cases involving this powerful machine. The Occupational Safety and Health Administration (OSHA) has identified different potential equipment operation hazards and this includes auger drilling. The related hazards may include the possibility of a worker being struck by the equipment, a tip-over accident, a run-over accident when backing digger derricks, electrocution, back strain and chemical exposure.

Sometimes when an accident strikes, the individual involved will have a decreased reaction time, and thus allows that worker to be drawn into what is called ‘injuries by chance.’ These injuries can be prevented if the worker is equipped with the proper knowledge and training in occupational health and safety hazards. Accidents that lead to severe injury or death can be overcome by simple awareness and recognition of the dangers that are always present in the workplace.

In using a power auger drill, one should be free from harm. A worker should be free from any high level physical risk or exposure to a foreseeable occupational crisis. An operator should undergo training to identify or recognize work-related hazards when using the machine. A simple awareness can save an individual from a fatal accident.

Safety Factors in Using Augers

The following are simple guidelines on how to avoid danger when using handheld, power and truck-mounted augers.

1.The machine should only be operated by a trained and qualified individual. The user should have a good mindset when using the device. In connection, the operator should be well-trained in identifying hazards in the drilling process.

2.All operators should abide with the applicable guidelines set by OSHA and ANSI in operating vehicle-mounted devices. This will ensure that all operations are being properly guided by this set of rules.

3.The operator should know the warning and safety alert symbol when using a heavy-duty power device. This is essential in promoting safety and avoiding potential injuries.

4.The operator should read the User’s Manual before using the machine. Operators must understand and read the instructions in the guide, particularly the parts of the manual that concern danger, warning, and caution signs.

5.Survey the scene for any hazards before excavating a hole in the ground as materials might be present underground – utility lines or landscaping fabric. Be sure about the underground lay-out.

6.Take extra care when using a power auger drill because danger is always present.

7.The operator should have knowledge in the operation of this machine in case of emergency.

8.Maintenance should be done by licensed professionals prior to the use of the machine.

9.Utilize protective equipment when using the drill such as hard hats, insulated gloves, safety glasses and goggles, safety vests and work boots.

10.Conduct a thorough pre-operational inspection of the power auger and/or drill bits prior to usage.

11.Have full control of the power auger. Kick-backs and drill torque accidents may happen.

12.Pay close attention when drilling.

13.Do not wear loose fitting clothes when drilling.

14.Use the machine in a safe and careful manner.

An auger drill is an important tool for digging holes faster and more efficiently than what can be done by hand; however, the usage of this equipment could lead to both minor and major injuries. To combat an accident brought about by the usage of this machine, operators need to have a simple knowledge of the identification and recognition of any hazards. The relationship between safety concerns and powered augers is something that cannot be ignored!