It is possible for any person possessing moderate do it yourself skills to install the necessary equipment for solar energy panels which will help take some of the power load off outside sources. A full home changeover to complete solar power might be well out of the price range of many homeowners especially when including the price of installation into the figures. However, the beauty of do it yourself packages is that the handy homeowner is not limited to just options offered by the installer.

A craftsman of intermediate skill level may want to consider a solar panel kit where all the parts needed are packed together. While an advanced craftsman may well choose to design their own system from the ground up. Solar power can be used to warm water for showers and dish washing it it could be used to power any or all of the appliances in a home.

In addition, some segments in the installation will include working with electricity and it is usually wise for the do it your self person who is not a licensed electrician to have one look over their design before they pull that switch. However, in most cases the installation can be handled by a competent artisan with moderate skills. The electrician might be called in after everything is set up and ready to go, just as a safety precaution.

A solar panel kit will come with all parts necessary to set it up but the purchaser should check to see if the power inverter is expandable. Less expensive and smaller kits may not include an expandable inverter. While it is possible to later upgrade or add more inverters, this should be considered when planning the installation. There are also some points about where and how the panels are attached to the roof that need attention.

The first is when installing the panels they must be secured to a rafter or joist. Panels that are improperly secured risk blowing away and the loss of the system. Any item meant to remain stable is attached to a joist or secure portion of the frame and solar panels are intended to remain in one position. A laser sight or chalk line will provide a guide to keeping the panels in a straight line as they are installed.

While how securely the solar panels are attached is important, where they are attached is also important. Each moment that a panel can collect sunlight is that much more energy that can be stored and used for your home. That means that any obstructions should be removed such as trees between the panels and the sun. In the case of buildings, which might shade the panel for part of the day, moving them is usually not an option. The homeowner should check the other side of the roof for a sunnier place if shaded panels might be a problem.

Sustainable energy is not only popular with individuals but also supported by states and some federal programs in the U. S. The homeowner should research the possible sources of rebates and even financing available. With that extra support the panels might be extended to cover much more area even for those with limited budgets.

Solar panel self installation can help defray enough of the cost of going with a renewable energy source that families who may not have believed they could afford it find it is possible. The savings might just buy a few more square feet of panels or it could simply go toward the investment cost. While many people have successfully installed their own solar units it should be remembered there is no money back guarantee from the installer if mistakes are made during self installation.

Articles regarding non-traditional energy sources are available on numerous Internet websites. Learn how solar energy can be tapped to provide a clean and abundant source of power for your home and community.